- Reaction score
- 3,010
Was called out to a wall heater not working, took FCU off and both L and N supply cables had snapped off. This is a spur off a ring. I have not tested the ring as cannot isolate but all plugged in equipment is performing normally.
Voltage on the exposed ends L-N was 124V, L-E 238V.
My thoughts are loose connection at the point it spurs of the ring or damaged cable.
Any other theories?
I have two hours this evening to find the fault and make safe, can't turn the power off until 18:00.
Ta in advance
Voltage on the exposed ends L-N was 124V, L-E 238V.
My thoughts are loose connection at the point it spurs of the ring or damaged cable.
Any other theories?
I have two hours this evening to find the fault and make safe, can't turn the power off until 18:00.
Ta in advance