Discuss 2382-12 17th c and g is difficult?? Help please in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

hello everyone
so,i learning this book !i started 2382 curse with bad!notanother english boy!only just 2 people in the curse bit stranger,but not bad
this is the first impression!i do same test by 30 question and usuali 16 is right 14 is mistake!this is still poor\!!!yes?
 
Well they should be giving you aids to assist your learning? You appear to be full of doubt - have you approached them for some further help?
 
but what can i do?

2382 is an 'open book' exam

This means that you get a copy of BS7671 to take with you into the exam. All of the answers to the questions are in the BS7671 book.

So you need to learn the STRUCTURE of the book, what sections relate to waht part of electrical work and how to find them in the CONTENTS and the INDEX.

So, if you got a question like:"What is the minimum cross-sectional area of a buried copper earth conductor that is protected against corrosion by a sheath but is not protected against mechanical damage."
Underneath the question you'll be given 4 possible answers, only one is correct.
Lets say the 4 possible answers are
a. 2.5mm
b. 10mm
c. 16mm
d. 25mm

You would go to the INDEX (at the back of the bokk). Look for EARTHING CONDUCTORS, SELECTION
and the index gives you the section that you need: 542.3
When you turn to that section you'll see the answer is given in Table 54.1
The correct answer is 16mm²
So you select answer c and then go to the next question.

It is not so that you KNOW the answer; the exam is to find out is you know WHERE TO FIND THE ANSWER.

You should know about all of this from your course.

Go and buy this book.
http://www.amazon.co.uk/IET-Wiring-...2320/ref=sr_1_1?ie=UTF8&qid=1347208755&sr=8-1
 
2382 is an 'open book' exam

This means that you get a copy of BS7671 to take with you into the exam. All of the answers to the questions are in the BS7671 book.

So you need to learn the STRUCTURE of the book, what sections relate to waht part of electrical work and how to find them in the CONTENTS and the INDEX.

So, if you got a question like:"What is the minimum cross-sectional area of a buried copper earth conductor that is protected against corrosion by a sheath but is not protected against mechanical damage."
Underneath the question you'll be given 4 possible answers, only one is correct.
Lets say the 4 possible answers are
a. 2.5mm
b. 10mm
c. 16mm
d. 25mm

You would go to the INDEX (at the back of the bokk). Look for EARTHING CONDUCTORS, SELECTION
and the index gives you the section that you need: 542.3
When you turn to that section you'll see the answer is given in Table 54.1
The correct answer is 16mm²
So you select answer c and then go to the next question.

It is not so that you KNOW the answer; the exam is to find out is you know WHERE TO FIND THE ANSWER.

You should know about all of this from your course.

Go and buy this book.
http://www.amazon.co.uk/IET-Wiring-...2320/ref=sr_1_1?ie=UTF8&qid=1347208755&sr=8-1
aredy got it an use it!but thanks
 
hell



not yet
exam will be on 24/09 monday eveving!!!
i hope will get pleasure gift for my birthday whis is on 20/09
so everyone support me if can on 24 monday from 6pm!
regards


Good luck mate.:yes:


PS - Do the questions you know the answers to first . This gives you an idea of how much time you have to answer the rest.
 
I'm also going to start my 17th edition 2382-12 next week its a bumer because i bought the Red version 2 year's ago together with OSG also red when i was learning the 2330 level 2 and 3, now i have to invest in the Green Regulations Book
Thanks
Rudeboy500
icon9.png
 
As long as you can read, which you've already demonstrated, you'll be fine. If I could teach our dog to read I reckon I could get him through the exam. Chill mate, it's in the bag:)
 
congratulations tamas. i have to say, your posts do make me smile. i like your interpretation of our language and, whilst you say your english is not so good, it's a damn site better than my hungarian. well done mate.
 

Reply to 2382-12 17th c and g is difficult?? Help please in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

Similar Threads

Hi guys, I've gotten AI to write up a terms and conditions for my company and then went through it with AI and tweaked it to make it sound a...
Replies
3
Views
369
Hi all, first post so go easy! This is for people who are looking for more info on the course and exams and is from my experience of doing the...
Replies
1
Views
3K
Hello all, I've just been perusing the AM2/E/S threads on here. Thought you might like a bit of a review. If, like I did, you find yourself...
Replies
7
Views
2K
Hi, was wondering if anyone could help me please. just re sat my am2 testing exam but failed because i didn't verify my results correctly to the...
Replies
3
Views
4K
Good afternoon, I have always loved things to do with electrics and always wanted to become an electrician. Life throws things at you which led...
Replies
3
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock