Discuss ADE optima compact panel. in the UK Electrical Forum area at ElectriciansForums.net

have you reset the panel before trying to set it? with the lid back on, try customer code then reset key.
 
it won't activate till the exit timer has timed out.
 
Great stuff. Thanks for letting us know.
Hi. Just joined the forum. Not an electrician by trade,I am a Mechanical Engineer. Our old alarm was a Logic 4, today, I have just replaced this with an Optima Compact G4. Rather than program out the unused zones,I have just linked them out in the panel. I would like to program a part set for at night, and this wold would be on zone 2. Instructions mention programs 2 or 3, but I don’t know what mine is. I am just asuming that if zone 2 is on program 2, I would set it as follows, code followed by P then press key 2 to isolate that zone. Is this correct? Thanks
Martin
 
if i rem correct. you programme the zones you want to be off at night as part set omitted.then you have part set 1, part set 2, can have a lookk in the manualtomorrrow when the beer glasses have reset to normal vision.
 
I just put the code in for the alarm and omit the upstairs sensor zone. Easy..
 
Spoon has more security on his stockpile of cheesecake than Downing Street has.
 
Spoon has more security on his stockpile of cheesecake than Downing Street has.

Too true.... Naked pic of myself on each cheesecake.... keeps everyone away...
 

Reply to ADE optima compact panel. in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hey all, I'm looking for some advice to help me troubleshoot my strange issue with my consumer unit/fuse board on which my RCD keeps tripping...
Replies
25
Views
1K
Hi there, long time lurker, first time poster here. Straight down to it.. A friend asked me to add some sockets and additional lights to a small...
Replies
0
Views
843
Hello all, I've just been perusing the AM2/E/S threads on here. Thought you might like a bit of a review. If, like I did, you find yourself...
Replies
7
Views
2K
Hi guys. For the past 2 nights (9:30pm last night & 8:40pm tonight) my house alarm (ADE OPTIMA COMPACT) has gone off by itself. When the alarm...
Replies
7
Views
6K
Hi, I’ve been asked to look at a ADE optima compact plus as the zone 1 light is activating and it beeps everytime the PIR as activated I.e when...
Replies
3
Views
11K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock