B
bri8384
Hi Guys long time reader, first time poster
Just took my AM2 this week, was steady enough but I seem to have failed the expensive part being the install but just the the SWA which will mean a a resit on my install part, My problem is I'm not really sure why it could have failed, unless I misunderstood the spec??
Here is what I believe I did and I was wondering if any was able to see the reason I failed??
I used 4 core SWA sleeved brown, black, grey and blue at each end. glands seemed fine, banjo at db and 1.5mm flylead to earth bar, castle nut at isolator again with 1.5mm earth to backbox.
From isolator came out to comando socket in 2.5mm singles brown/black/greay and blue and 1.5mm earth (should this have been 2.5mm?
During testing it all seemed fine so I'm assuming there were no crossovers or cable breaks, cables were clean (ni nicks) I can only assume I have misunderstood something for this to be a fail??
Any help would be appreciated as I really don't want to head back in not knowing my mistake...
Thanks in advance Bri
Just took my AM2 this week, was steady enough but I seem to have failed the expensive part being the install but just the the SWA which will mean a a resit on my install part, My problem is I'm not really sure why it could have failed, unless I misunderstood the spec??
Here is what I believe I did and I was wondering if any was able to see the reason I failed??
I used 4 core SWA sleeved brown, black, grey and blue at each end. glands seemed fine, banjo at db and 1.5mm flylead to earth bar, castle nut at isolator again with 1.5mm earth to backbox.
From isolator came out to comando socket in 2.5mm singles brown/black/greay and blue and 1.5mm earth (should this have been 2.5mm?
During testing it all seemed fine so I'm assuming there were no crossovers or cable breaks, cables were clean (ni nicks) I can only assume I have misunderstood something for this to be a fail??
Any help would be appreciated as I really don't want to head back in not knowing my mistake...
Thanks in advance Bri