Cooker circuit advice.

[Munders]

currently doing a re wire waiting for the kitchen spec. Customer has planned for a halogen hob in an island which will get its own supply however he’s also after 2 single ovens stacked on top of each other on the opposite side of the room. It’s likely that both ovens will be on together so I plan to have them on their own circuit too. Just after advice on whether I should pull in it’s own ring or a 4mm radial. Or different

 

[DPG]

I would recommend giving the spec of all the devices.

 

[Wilko]

Hi - without specifications I’d plan for 2 radial circuits of 6mm / B32 and see what comes in .

 

[Dustydazzler]

If In doubt then anticipate the worst case , pull in a couple 4 or 6mm radial feeders

I never use a ring circuit for cookers / ovens / hobs