Error code F8 on a acorn 180

[francoisgilber]

Hello on my acorn 180 about 2 years old, I did fix the f7 code, still left a f8 code, and i find nothing on this code, all i fond it is maybe aTilt limit leveling protection switch.
and i found nothing on it, no swicth found !!
don t know what to do, can someone help plse
Tks

 

[mattg4321]

What’s an Acorn 180?

I remember the old Acorn computers from the 80’s that we had at school. Maybe yours has a problem with the 8 inch floppy drive?

 

[James]

Pictures are always good, we like pictures here.
Saves us trying to work out why your oak tree seed won’t work.

 

[westward10]

It is a stair lift and I assume a follow on from this thread.

acorn 180 stairlift problem f6 and f7

hello I desinstal and reinstall an acorn 180, it had only 2 weeks of use. it flash f6 at first, i use the manuel mode to move up and down, i did use a powerfull drill to move it, so the carriage was moving a bit fast. the the F7 flash. How do i solve the problem ? I read somewhere that it was...

www.electriciansforums.net

 

[francoisgilber]

What’s an Acorn 180?

I remember the old Acorn computers from the 80’s that we had at school. Maybe yours has a problem with the 8 inch floppy drive?

sorry guy, it s a chairlift , ;-)
[automerge]1597615790[/automerge]

It is a stair lift and I assume a follow on from this thread.

acorn 180 stairlift problem f6 and f7

hello I desinstal and reinstall an acorn 180, it had only 2 weeks of use. it flash f6 at first, i use the manuel mode to move up and down, i did use a powerfull drill to move it, so the carriage was moving a bit fast. the the F7 flash. How do i solve the problem ? I read somewhere that it was...

www.electriciansforums.net

VERY WISE mOD ...
F6 AND F7 ARE SETTLE ...F8 NOW OUFFFF