immersion heater

[pluselectrical]

voltage across neutral and earth on immersion heater.

Have check element for R 18.7 ohms checked contunity all ok check stat all ok remove flex and check voltage all ok when reconnect to immersion heater i get voltage across l-e n-e no voltage across l-n?

 

[applemac]

sounds like a blocked wire, try fernox

 

[telectrix]

broken neutral.

 

[pluselectrical]

tested flex from spur and all ok

 

[Octopus]

Knackered DP isolator?

 

[pluselectrical]

Thank you all! check and changed DP isolator all ok (blonde moment)

 

[Octopus]

Thank you all! check and changed DP isolator all ok (blonde moment)

There is a "thanks" button at the bottom left hand side of each post!

 

[Ducksy]

Thank you all! check and changed DP isolator all ok (blonde moment)

There is a "thanks" button at the bottom left hand side of each post!

They need a donate button

 

[Octopus]

They need a donate button

Too many sponsors!

 

[SirKit Breaker]

Thank you all! check and changed DP isolator all ok (blonde moment)

Lucky you, i only have grey moments these days, its an age thing!

 

[aaelectric]

Why does this happen and is it dangerous?