Max Demand and Diversity

[martysparky]

in determining Maximum Demand and Diversity may be applied, which is
a. Taking the sum of protective devices from any CCU
b. Taking into account that not all loads will be switched on at the same time
c. Taking into account that all loads doubtless will be engaged simultaneously
d. Ensuring that an economical and reliable design preference is utilised.

 

[davelerave]

seems to be a couple of missing words

i assume the answer is D

as the others are all incorrect

 

[martysparky]

Actual words from paper

 

[KINKY]

Answer is B

 

[Ponty Massive]

I would have gone for B as well

 

[davelerave]

the problem with answer 'B' is that all loads may or may not be on at the same time depending on the installation etc.


the 'maximum demand' could equal the 'total connected load' in some cases

 

[Sparky Ninja]

I would go for D as well.

 

[malcolmsanford]

the problem with answer 'B' is that all loads may or may not be on at the same time depending on the installation etc.


the 'maximum demand' could equal the 'total connected load' in some cases

And you are spot on Dave Reg 311.1

 

[martysparky]

I put this up as this question was given to a number of people and about 70% said the answer was B out of head but when read reg 311.1 were unsure how to answer.

Its been said that both are correct I wonder what the answer to that is

 

[Sparky Ninja]

B just relates to the diversity principle IMO. While D contains the overall objective.

 

[martysparky]

I guess if you had to reference then you'd quote reg 311.1 so its got to be D from that point of view too.

Cheers guys

 

[rustynails]

I've been revising for my 17th in a week, I have the lecsoft 2382-12 sim and have just had this question. I answered D and the correct answer is B. According to 311.1 economic and reliable design helped me choose D really. What gives?

 

[brman]

I've been revising for my 17th in a week, I have the lecsoft 2382-12 sim and have just had this question. I answered D and the correct answer is B. According to 311.1 economic and reliable design helped me choose D really. What gives?

Don't worry about it. I reckon they put in these sort of questions just to make sure you don't get 100% in the exam. Given that you are the only person who gets to know your pass mark, who cares?

 

[trev]

As long as you can read, which you have proven here, you will pass the 17th mate

 

[telectrix]

but he has to know where to read. then again, i passed it with the onset of senile dementia kicking in, so it can't be too difficult.

 

[Knobhead]

I passed, didn’t even have a copy of the BRB. It’s not worth the paper it’s written on!

Sorry to everyone I’m in GRUMPY OLD GIT mode at the moment.