Discuss What else do you offer or would think about offering ? in the UK Electrical Forum area at ElectriciansForums.net

I have worked with and always admired some of the older blokes on-site who can do a bit of everything , like plumb a new boiler , fit a kitchen , tile a floor and rewire a house all to a good standard.

I think as already mentioned a lot of it boils down to people being fed up waiting for other trades to turn up so you can get a job finished so you just learned to do it all yourself
 
I have worked with and always admired some of the older blokes on-site who can do a bit of everything , like plumb a new boiler , fit a kitchen , tile a floor and rewire a house all to a good standard.

I think as already mentioned a lot of it boils down to people being fed up waiting for other trades to turn up so you can get a job finished so you just learned to do it all yourself
Once a client trust you but accept limitations on skill /finish quality etc etc /Its a good earner .
 
I'm terrible at plastering / filling etc. so I just don't do it.

Plumbing wise like for like replacements of showers and instantaneous water heaters only for me and even at that only if getting a plumber is an issue.

Joinery wise I'll do what's needed to get my own job done but that's about it.

I like my job, that's why I do it and don't really enjoy the other stuff.
 
I like a bit of plumbing, and it's amazing how often a client asks for some plumbing work. when you are there. Some carpentry too, but not my favourite.
Last job for a neighbour was a new immersion heater timer, fitted in a cupboard in the bathroom. I switched on the light and the extractor fan started...what a horrible noise! A few twists of the screwdriver fastened it back to the wall and instantly it was virtually silent. How long has it been like that? I asked...
Since just before lockdown, but I couldn't get anyone to sort it...
Then she asked, I don't suppose you could fit a new shower screen seal?
5 minutes later, it's done...she insisted on paying me extra for the extra jobs.
Always handy to have a couple of extra skills, imho.
 
I have always found it unbelievable that most trades do not supply a complete service, if you rip something out or gouge out a wall, you should make it good to at least decoration stage, saying you'r no good at plastering is not a reason it's an excuse.
 
I have always found it unbelievable that most trades do not supply a complete service, if you rip something out or gouge out a wall, you should make it good to at least decoration stage, saying you'r no good at plastering is not a reason it's an excuse.
I agree ( to a point )

If I add a couple socket for Doris up the road then I will do my best to fill all the chases and around the boxes ready for painting

If I do a full re-wire more often than not my price will not include making good and in general I am too busy to make good as I go so I often ask the client to get a plasterer round after I have finished 1st fix stage.
That said if the client REALLY wants me to do fill the chases then I will add an extra few days on to the job at my usual rate and whack some bonding in to the chases
 
Agree there is a point where it becomes uneconomical for the client and the tradesman for them to make good, if its a refurb then the plaster's are going to be following on anyway its pointless to step outside your remit.

Ohh Doris, Jamie Lee Curtis in True Lies.
 
Try getting a plasterer to pop around and do tiny bits ! Much better to offer the service of bonding to a good finish so a decorator etc could fine fill etc or the customer does it . But state its at normal rates .if the work is offered take it ! Only time its a issue if they ask after the job and you are off to another appointment etc
 
I assume this is all your work ?
Except for the tiling in the bathroom.
My tiling is not good! 20180314_164500.jpg
This tiler is fantastic.
 

Attachments

  • IMG_20170527_182011.jpg
    287.1 KB · Views: 16
  • IMG_20170603_172826.jpg
    210 KB · Views: 20
Last edited:

Reply to What else do you offer or would think about offering ? in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

I was asked to see why a set of sockets weren’t working in the house (which appear to be a ring circuit based on breakers) There was no power on...
Replies
27
Views
1K
Hello all, First of all I apologise if this is in the wrong forum, I figured the general forum may be the best bet :) Thank you for taking...
Replies
3
Views
585
I was just googling for skeleton boards after reading the last thread and various pictures of consumer units popped up, some wired terribly and...
Replies
6
Views
729
Just to be clear… I am going to do the correct thing here and pay for the correct parts…. I just wanted to start the discussion. My particular...
Replies
6
Views
283
Currently I’m using freeagents platform for invoicing and it’s decent and gets the job done but it’s lacking a few features. Firstly I want to be...
Replies
13
Views
845

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock