Danfoss FC51 lack of power options in configuration

Discuss Danfoss FC51 lack of power options in configuration in the Commercial Electrical Advice area at ElectriciansForums.net

Share this page

I

icaro600

Reaction score
0
Hi all.
I have a Danfoss FC51 vfd. When I go to the menu 1-20, only appears the options from 8 to 11, which corresponds to a 1.1kW to 3kW.
I have tested directly in the local console and also with the MCT10 software, there are only the options from 8 to 11 available
I have a motor of 700W, but I can´t configure that power.
I would appreciate some help about this.

Thanks
 
icaro600 said:
Hi all.
I have a Danfoss FC51 vfd. When I go to the menu 1-20, only appears the options from 8 to 11, which corresponds to a 1.1kW to 3kW.
I have tested directly in the local console and also with the MCT10 software, there are only the options from 8 to 11 available
I have a motor of 700W, but I can´t configure that power.
I would appreciate some help about this.

Thanks
Click to expand...
Attached a screenshot
 

Attachments

  • Capture.JPG
    43.3 KB · Views: 4
icaro600 said:
Hi all.
I have a Danfoss FC51 vfd. When I go to the menu 1-20, only appears the options from 8 to 11, which corresponds to a 1.1kW to 3kW.
I have tested directly in the local console and also with the MCT10 software, there are only the options from 8 to 11 available
I have a motor of 700W, but I can´t configure that power.
I would appreciate some help about this.

Thanks
Click to expand...
Looks like you need to buy a smaller inverter
 

Reply to Danfoss FC51 lack of power options in configuration in the Commercial Electrical Advice area at ElectriciansForums.net

Share this page

Similar Threads

C
Cooker and kitchen power cables to be enclosed in rockwall
Hello All, I have just found out that a family member who is having some Building work done has been advised to insulate above the Kitchen...
Replies
16
Views
793
chris murphy
C
PetesEV
EV Charger installed in the garage see options
I may have posted this before but not sure if it made it in. I want to install an EV Charger in my garage. The panel is two stories up and the...
Replies
0
Views
489
PetesEV
PetesEV
timhoward
The new-ish ProjectEV Apex range
I'm fitting one of the Apex 7S units on Friday. I'd avoided the original range after a couple of bad experiences but I figured a new model might...
    • Like
Replies
6
Views
778
timhoward
timhoward
MichaelT
Data Logging software for D03122
Hi All, long time no see. I was having a problem with LED controller failures, so instead of sitting there for hours watching a scope and a...
Replies
0
Views
1K
MichaelT
MichaelT
M
Thatched wiring - ways to make safer
Well....wiring in a 1750s thatched cottage attic, not wiring made from thatch 🤪 One we have been letting for over 20 years (as well as enjoying...
2 3 4
Replies
63
Views
4K
DPG
DPG

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Tile Blog
Plumbing Advice
Contractor Talk
British Standards in Tiling BS5389
Electricians Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock