T
TPES
Megger BM401/2
Product Code: BM401/2
Test button located on probe allowing the instrument to be perated manually.
Accurate and fast true voltage indication without the need for seperate multimeter.
Simultanious analogue and digital displays for maximum information.
Versitile instrument for many different testing applications - ideal for service or maintenance engineers.
Dust and moisture protected to IP54 for maximum safelt enev in the harshest of environments.
500V analogue / digital with voltage range.
Megger LT7 Digital Loop Tester
Product Code: LT7
Designed for repetative testing. Two wire set available for testing lighht fittings and at the distribution board
Click each link to see more info..
Megger LT7 Digital Loop Tester
AND
Megger BM401/2
Both cost over £700 new!
Send me a private message if interested.
Both in there cases, each with there own test leads. I can send you photos if you like. £230
Product Code: BM401/2
Test button located on probe allowing the instrument to be perated manually.
Accurate and fast true voltage indication without the need for seperate multimeter.
Simultanious analogue and digital displays for maximum information.
Versitile instrument for many different testing applications - ideal for service or maintenance engineers.
Dust and moisture protected to IP54 for maximum safelt enev in the harshest of environments.
500V analogue / digital with voltage range.
Automatic detection of live circuits
Automatically discharges after test
Insulation tests at 1mA into rated load
Continuity tests at 200mA s/c current
Choice of test button - Locking / Non Locking- Fully meets all relevant regulations: BS7671, BSEN61557, EN61010-1 Safety Standard.
AND
Megger LT7 Digital Loop Tester
Product Code: LT7
Designed for repetative testing. Two wire set available for testing lighht fittings and at the distribution board
Guarenteed not to trip RCDs rated at 30mA and above - even electronic ones
Using the latest technology the Megger LT7 is capable of measuring loop impedance without tripping RCDs rated at 30mA
Low current range for RCD protected circuits
Maximum loop test range 2000 Ohms
Conventional high current (23A) testing with a 0.1ohm resolution
Direct reading of PSCC and PEFC
Operating voltage 50v to 263v, 50Hz and 60Hz
Test light fittings with 2-wire lead set- Mains test lead and 2-wire lead set supplied with test and carry case
Click each link to see more info..
Megger LT7 Digital Loop Tester
AND
Megger BM401/2
Both cost over £700 new!
Send me a private message if interested.
Both in there cases, each with there own test leads. I can send you photos if you like. £230