Hacksaw Blade

[CenterSparks]

What TPI blade do you have in generally, when it's sitting in your kit and do you ever bother to change it for different jobs?

 

[telectrix]

24 and a 32. the 32 is great for metal tray and trunking.

 

[steve50]

24,18,14
18,14 i use on copper

 

[shanky887614]

24 on everything.

trunking,tray,conduit and unistrut

 

[dan86]

same for me. 24 for everything. does the job

 

[danzor]

Anything that has teeth on it

 

[Resu]

32 for everything.

 

[telectrix]

the 24 tpi is like a beer... good for everyday tipples, but the 32tpi is more like a fine wine. for special occasions and fine cuts .

 

[dan86]

...lol

 

[keniff]

Anything that has teeth on it

The guys on some jobs I do keep turning the hacksaw blade over on mine! So the smooth side is where you would normally cut lol

 

[steve50]

and Junior hacksaw on swa

 

[shanky887614]

and Junior hacksaw on swa

why not just use an old/spare hacksaw blade

much easier than using a junior, means you have less tools to carry as well

 

[Stuuk1]

32 for a neat cut, 24 eat unistrut!

 

[steve50]

is ok on the bigger cables on the small cable junior is better

 

[rmc86uk]

32 for tray, 24 for trunking, 18 for unistrut.