Help with EICR codes!!

[pc1966]

I'm guessing the blue is a L3 phase colour?

Westward10 just beat me to it!

 

[dtec dave]

So it's likely that the 2 T+E ends in the DB join L to L and N to N onto singles, but the CPCs connect to the metal conduit,(this is all hidden somewhere) then the CPC is taken off every back box to connect to the socket. Is this acceptable?? Obviously I can't get R1R2 off this so would I take an R2 reading off the furthest socket? The Zs readings I took were all acceptable.

 

[pc1966]

R1+R2 applies to the circuit, it does not matter if R2 is conduit or cable.

What is important is it is a sound connection, physically and electrically.

 

[westward10]

So here it is in the 15th Ed.

 

[dtec dave]

So here it is in the 15th Ed.View attachment 64085

Well blow me down...every day's a school day!! I'm a bit young for 15 edition, started on 16th.

 

[westward10]

It was often misread and should only be applied to distribution circuits not final circuits like you have.

 

[dtec dave]

It was often misread and should only be applied to distribution circuits not final circuits like you have.

Well I just misread it!!

 

[westward10]

Read the *bottom note.