W
whazza22
Hi there,
I have very little knowledge on motors as I have never really dealt with them, so im after some advice on how to connect a motor.
The motor is part of an Air Handling Unit with has 2 motors connected together via belts but only 1 running at any time.
One of the motors was faulty and has come back from repair and needs to be reconnected.
From the isolator, there are 6 cables labelled u1,u2,v1,v2,w1 and w2.
I can see all of those connections on the motor terminals but there are no links in place on the motor for star or delta (the lid shows where links go for star or delta)
Does the motor still need to have links in place or is that only when you have 3 cables?
Thanks
I have very little knowledge on motors as I have never really dealt with them, so im after some advice on how to connect a motor.
The motor is part of an Air Handling Unit with has 2 motors connected together via belts but only 1 running at any time.
One of the motors was faulty and has come back from repair and needs to be reconnected.
From the isolator, there are 6 cables labelled u1,u2,v1,v2,w1 and w2.
I can see all of those connections on the motor terminals but there are no links in place on the motor for star or delta (the lid shows where links go for star or delta)
Does the motor still need to have links in place or is that only when you have 3 cables?
Thanks
Last edited by a moderator: