underground cable joint

[hooman68]

for reducing ac resistance in EHV milliken type cable, the strands should insulated by using enameled strands.
I want to install underground large cross section milliken type cable with individually insulated strand.
I don`t know what accessories i need to remove enameled coating from each strand.
would you help me to know how should i do?
and what kind of accesories for these purpose i need?

 

[Simonslimline]

Your profile states "Trainee Electrician".

Do you have a mentor?

 

[hooman68]

I changed it to mentor.

 

[Darkwood]

I changed it to mentor.

What do you mean when you say your a Mentor?

Can you clarify your level and experience so our members can tailor there answers appropriately, can you also clarify the voltage you are working with here as EHV can be different depending which standards and industry your in

 

[Simonslimline]

I changed it to mentor.

So from trainee suddenly to mentor!

Your profile says UK, except your wording in the OP is not very convincing to be honest.

 

[Lucien Nunes]

An enamelled cable is going to be 1,000mm² or more, so we are talking about a serious termination. I don't have experience of terminating large HV cables but I think one can safely say that experience is needed and careful study of the manufacturers' instructions for the termination, which will be matched to the cable (an enamelled-strand cable is physically larger than a basic Milliken sectored cable). They will probably offer much more specific information than we can on a forum.