DPN5 Tick Sheet Explained

[skydog1]

great post ta

 

[nowaypedro]

Edd - a great piece of work, much appreciated

 

[peterhardacher]

That's most helpfull that thanks

 

[electrosparks]

Wow what patience you have ed.great work thanx for helping.if youever come to dagenham I will buy you abeer or two.

 

[TreeFaze]

Sterling job Edd, obviously taken a lot of time and effort, can't fault you pal:34:

 

[comptonspark]

thanks great post

 

[Stompy2]

Great essay---- I think this will be very handy.

 

[rattlehead85]

Great article and very helpful on-site. I do tend to disagree a tad regarding M.E.T. There is not actually a code warranted for bonding connected directly into a fuseboard so long as it is clearly marked and identified and removable only by use of s tool but i would say it is open to interpretation.

 

[Edd]

Great article and very helpful on-site. I do tend to disagree a tad regarding M.E.T. There is not actually a code warranted for bonding connected directly into a fuseboard so long as it is clearly marked and identified and removable only by use of s tool but i would say it is open to interpretation.

Sry been away from here for a while. I agree with you, trouble is I use Click software NICEIC indorced! and they have in it pre wrighten items, and in the C3 section this is what comes up. so ive added it here. But yes I completely agree, but someone at the NIC has desided it needs mentioning!!

 

[Badged01]

Sry been away from here for a while.

Was that at Her Majesties pleasure or just taking a break ...... :detective:

 

[Mark6098]

Very helpful thank you!

 

[rattlehead85]

Sry been away from here for a while. I agree with you, trouble is I use Click software NICEIC indorced! and they have in it pre wrighten items, and in the C3 section this is what comes up. so ive added it here. But yes I completely agree, but someone at the NIC has desided it needs mentioning!!

Any chance of a pm please of this handy walk through guide so i can print it off and slide into my BGB to add to the BPG 4b.
Excellent work!

 

[Sb8389]

great post edd any chance of sending it me by pm so I can keep it for future reference. many thanks

 

[Richard Burns]

This is Edds DPN5 check list sheet explained prepared as a normal pdf file (8 pages) and also as a pdf as a condensed document that (may) fit on two sides of A4 (if you can print to the edges of the page)(font size 7.5 and two columns).
The data is taken from the above posts and put in the normal order with little else done to it.
View attachment Edd DPN5 Tick sheet explained condensed.pdf
View attachment Edd DPN5 Tick sheet explained.pdf

 

[SIIVION]

Edd, thank you very much for posting this information, much appreciated. Printing it out shortly to go in my 'extremely handy' folder.

 

[scootknew]

what does lim and met mean here?

 

[Leesparkykent]

what does lim and met mean here?

I haven't read the thread but LIM=limitation and MET= main earthing terminal.

 

[scootknew]

spot on

 

[James sparks]

very very helpful! Thanks

 

[Piefingers]

Great Post