When I was on my level 2 hunting for a placement I came across someone advertising himself as an electrician. Turns out he was a jack of all and had only done a level 2 himself.
He was mostly a tiler but did anything a client asked and when doing bathrooms would redo the electrics and even said "once or twice a year I'll rewire a house".
I'd love to see the quality of this work......
[automerge]1595927974[/automerge]
it seems strange that I can change a socket in a lounge with no problem but can't change a socket in a kitchen without some odious requirement for firms
I'm not sure what's notification and what's not ...I must admit I don't fully understand the rules
[automerge]1595969483[/automerge]
it seems strange that I can change a socket in a lounge with no problem but can't change a socket in a kitchen without some odious requirement for firms
Brian if you came across a cracked socket in a kifchen and swapped it thats fine. If you then went and pulled in a 6mm cable from the DB to supply a cooker THAT is notifiable, if you were to swap a pendant that is fine if though whilst doing that you added in an extra light on a circuit that is non rcd protected not only is that now against regs but to then start altering the supply of said circuit by adding an rcd is notifiable.
Changing consumer units is also notifiable. So yes you have done notifiable work when you havent actually notified the relevant people
Any addition or alteration to an existing circuit in a special location
Non- notifiable works
All other work is considered non-notifiable, namely additions and alterations to existing installations outside special locations, maintenance, replacement and repair work.
Special locations and installations
A room containing a bathtub or shower
A room containing a swimming pool or sauna heater.
How will compliance with Part P be enforced?
Failure to comply with the Building Regulations is a criminal offence and local authorities have the power to require the removal or alteration of work that does not comply with the requirements.
[automerge]1595972129[/automerge]
I would just like to acknowledge you @Brian Taylor for at least asking the right questions and trying to get abreast of what I and others are banging on about. Kudos to you! I would also add that I started training when I was 17 in London around the east end. The working practices and installation equipment has no semblance of familiarity compared to now. The rules and regulations and enforcement have gradually become more and more complex. Because it has been an incremental and gradual change and increase over the years I have managed to keep abreast by continuing professional development (CPD) and so it is not so hard for me. I did it bite by bite so to speak. From where you appear to be it probably may seem a daunting task to get your head around modern requirements. However if you at least take on board the most basic of requirements, notification, you will be batting from a much more secure wicket so to speak.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.