Dave
-
- Reaction score
- 2
I recently bought a house and started to rewire it. A sparks mate came and helped with a few bits and I got him capping the chases.
He put a nail through a cable in one chase, then told me he may have done it in a couple of other places, he's not sure!
I had a plasterer going round behind me, so all the other chases are already plastered.
Is there a way of testing to see if he has put a nail through any other cables without ripping out all the plaster and physical looking?
My first thought was IR testing but obviously that only checks for shorts between conductors, it doesn't check if he's just knicked the pvc.
I'm mainly an industrial sparks, so I'm hoping there's a domestic sparks on here, that knows some method that I haven't heard of.
Any suggestions would be appreciated.
He put a nail through a cable in one chase, then told me he may have done it in a couple of other places, he's not sure!
I had a plasterer going round behind me, so all the other chases are already plastered.
Is there a way of testing to see if he has put a nail through any other cables without ripping out all the plaster and physical looking?
My first thought was IR testing but obviously that only checks for shorts between conductors, it doesn't check if he's just knicked the pvc.
I'm mainly an industrial sparks, so I'm hoping there's a domestic sparks on here, that knows some method that I haven't heard of.
Any suggestions would be appreciated.