Discuss information on becoming a qualified electrician please in the Australia area at ElectriciansForums.net

N

nicky.s

hi,
my name is nick.
i am currently a panel wireman,
i have an NVQ level 3 in electrical
a level 2 BTEC in electrical and elctronics
a level 3 BTEC national cert in electrical and electronics
aswell as PEO and Key skills units.

im curious to know what other qualification i would need to become a domestic electrician.
and if there are any vacancies around the north east of england.

any help will be greatly appreciated.

thanks
 
Probably none..

Although most schemes will want 2382 17th edition within 12 months of joining.

Give the schemes a ring... They're normally pretty helpful.

NICEIC - 0870 013 0382 (I have got the non premium number somewhere.. Will dig it out)
Elecsa - 0845 634 9043
NAPIT - 0845 543 0330

BSI - 08450 765600
I'm sure I read somewhere BSI is about £1500 all in... (Please correct if I'm wrong)

Hope this helps
 
Last edited:
He would be limited to Part P work alone via Napit and must have gained the 2382 within 12 months or he is a gonner.... Basically defined scope. He must pass their on-site assessment.

For Full scope membership. Either level 3 part 2, NVQ3 OR RECOGNISED APPRENTISHIP. Plus 2382 17th edition. To stay on full scope he must pass 2391 within 12 months...
 
i have btec nat cert and bit of hnc when i went to JIB they didnt want to know about them, as said before you will need 17th etc
 

Reply to information on becoming a qualified electrician please in the Australia area at ElectriciansForums.net

Similar Threads

Hi Everyone, I just move to UK and I'm a qualified electrician in Hong Kong. I tried ENIC to certificate my qualification which I have and ENIC...
Replies
0
Views
732
I have been working as an electrician under an NICEIC Approved Contractor for the past 10 years. I have my C&G2365 level 1/2/3 (acquired before...
Replies
1
Views
1K
Hi, I’m just looking for some advice/ someone to point me in the right direction please. Basically I worked as an electrician for 5ish years...
Replies
25
Views
2K
Okay so I have a C&G 2365 level 3 which covered electrical and electronics engineering and I want to do an NVQ and AM2 to become a full...
Replies
2
Views
967
C
CTE Services are looking for a third year apprentice/newly qualified electrician to join the company. Based in Yaxley, CTE Services have multiple...
Replies
0
Views
2K
CTE Services LTD
C

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock