Discuss Lifting glued T&G chipboard in the UK Electrical Forum area at ElectriciansForums.net
Any router that can take a 30mm guide bush will do, I use a Makita ½in router so I can use the ½in shank cutter as the the ¼in cutter shank is a bit weak and can easily shear if you push it too hard as I found out also the ½in routers are generally a bit more powerful, although I have used ¼in and 5/16in routers with the Routabout. The ¼in router works hard and even taking your time it is tool abuse territory and with alot of use would probably burn out, the 5/16in router is better but still has the limitation of the ¼in shank cutter IMO the ½in router just feels more positive@UNG I’m interested in the routabaout system. I’ve been trying to find out whether any router can be used or only their own?
I have borrowed one of these off a mate before and for small jobs where you just need 1 or2 access points to stick your hand in the floor void they are quiet good. You can glue in a metal cover plate once finished and be on your way in no time.
Solid noggins have been the electricians nightmare , I love working in old houses with the cross noggins where you can simply rod from one side of the room to the other...Was never a problem with herringbone strutting, the advent of solid noggins has made the job more difficult for anyone who needs access, but easier for the chippy, unless you need access at right angles to the joists.
Wolf Easi joist. A must for an intelligent house. Ive used nearly 3Km of Cat 6 in the house Im building. Nightmare with standard joists.Solid noggins have been the electricians nightmare , I love working in old houses with the cross noggins where you can simply rod from one side of the room to the other...
Solid noggins are a pain in the arse
If the chippy just used a bit of imagination and drilled a couple of large access holes in each solid brace it would make life easier if the electrician/plumber knew they where there, but again a bit more work for the chippy, so will not happen.Solid noggins have been the electricians nightmare , I love working in old houses with the cross noggins where you can simply rod from one side of the room to the other...
Solid noggins are a pain in the arse
Naughty naughtyMy father produced some old coloured cable when I was rewiring their house.
Naughty naughty
Reply to Lifting glued T&G chipboard in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.