- Reaction score
- 1,512
Good luck for the assessment, let us know how it went!
Discuss Low R2 and where to start in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
I concur.
Reg 411.3.1.1 "Exposed-conductive-parts shall be connected to a protective conductor....."
couldn't be bothered to type it all in, but you can read the rest for yourselves
Reply to Low R2 and where to start in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Similar Threads
Please advise what I should test / check next.
My usual qualified electrician who did all of the work here is in Ireland for 4 weeks and not...
Hi All
New to this forum, have read the posts on here from google but only recently signed up. I'm having some issues and some input would be...
Domestic house, ring final circuit on an rcbo, end to end tests: r1 = 0.95 ohms, rn = 0.98 ohms, r2 = 1.02 ohms.
It's rare a reading is too...
Morning All
I recently completed my first re wire and board change, (with help from the owner who is a gas fitter and plumper, who works with my...
I am not a qualified electrician, I was employed as an electrician after my MoD electronics apprenticeship but that was 30 odd years ago. So I...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Is it possible to put a 16mm swa on a 40a mcb protected by an rcd- Latest: phenolic_labels
-
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.