Hi. Just wanting to lower the height of this double socket. Just curious to know why one of the earth's has been cut. Is it Ok when lowering the socket and using a new plastic double socket to copy this exactly? Thanks.
Discuss Lowering existing electrical socket in the UK Electrical Forum area at ElectriciansForums.net
I think that was auto-correct from "When you re terminate lower, you should have the CPC in separate sleeving, and not twisted at all"When you re terminate lower, you should have the docs in separate sleeving, and not twisted at all.
Ok. Thank you. Very much appreciated.Electrical sockets or switches should be fitted at a safe distance (it is recommended at least 30cm horizontally) from a sink to avoid the chance of water coming into contact with electricity. Sockets should also be easily accessible. If appliances such as fridges, dishwashers, and washing machines are fitted under worktops, getting to sockets may be difficult. Ideally, these appliances should be controlled by a switched fuse connection unit mounted above the worktop where you can reach it easily. FCU above with Socket below the countertop.
Reply to Lowering existing electrical socket in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.