Hi, I’ve been asked to install some outdoor sockets and lights for a decking area where a hot tub is being put in.
There is a garage which has a 2.5mm armoured cable into a fused spur with the load side feed garage lights on a 3a fuse and the supply side feeding some garage sockets.
I was thinking of replacing the fused spur with a consumer unit in the garage and taking a supply out approx 5m in armoured cable to the decking area to supply a double outdoor socket and 2 lots of led lights.
Just looking for some advice on the best way to do this as haven’t done any outdoor installations before. Obviously the sockets and light switches will be ip rated for outdoors.
Thanks in advance.
There is a garage which has a 2.5mm armoured cable into a fused spur with the load side feed garage lights on a 3a fuse and the supply side feeding some garage sockets.
I was thinking of replacing the fused spur with a consumer unit in the garage and taking a supply out approx 5m in armoured cable to the decking area to supply a double outdoor socket and 2 lots of led lights.
Just looking for some advice on the best way to do this as haven’t done any outdoor installations before. Obviously the sockets and light switches will be ip rated for outdoors.
Thanks in advance.