S
Shamani1
Hi my hubby is doing a self study course to become an Electrician he has done really well with almost all areas of the written, classroom assessments and test, but due to terminal illness of a family member he basically not been able to study and work through the modules as he was. Long story short the course provider he was with has been taken over by another firm, and course work doesn't seem to have been handed over so he has to do several assessments in order to book his last set of dates for course (this is how I have understood it). Anyway he is quite discouraged right now due to what I believe a deadline of year end for completion under the current regulations, for get his course done, as he stuck on a few theory questions, I really would like to help him in any way possible, so I hope this forum is a means. Thank for listening her are some of the questions I know he is stuck on: Level 3 Unit 2 Short Answer questions: Q.3 When carrying out an inspection and commissioning process list (A) Three factors or verification procedures that the installation must meet. (B) Three safety precautions or test criteria to be met? Level 3 Unit 3 short answer questions Q.7 Describe two common faults that may occur the following (b) Cable terminations? Q.8 Describe briefly the following tests which are carried out on a completed electrical installation. (a) Continuity. (b) Insulation resistance. (C)Polarity. Q10. When verifying the continuity of a ring final circuit. (A) How many test are required? (b) How are the connections made in test 1? (C) What action is taken in Test 1 if a cable has an integral earth? Thanks in advance for you help Dee