D
dave1064
I have a strange fault. I have a split board. 2 rcd's. One keeps tripping but other is fine. I swapped them both and the same happened with the RCD I put in the place of the first one. Rcd's seem to be fine but when installed in that position they trip but are fine when in the other side... I hope that makes sense.
The rcd's are made by sector. They have codes at the bottom where these two rcd's differ. But house next door they are the same... The codes don't seem to be of any importance but if anyone has knowledge on sector rcd's then I'd be happy to hear if these codes have to match.
The rcd's are made by sector. They have codes at the bottom where these two rcd's differ. But house next door they are the same... The codes don't seem to be of any importance but if anyone has knowledge on sector rcd's then I'd be happy to hear if these codes have to match.