N
ngoodson1969
Hi all,
I have just replaced and tested my own CU.
I did the continuity testing on the 3 ring mains. On each one I crossed over the Line and CPC and got a reading of between 0.2 and 0.3 Ohms. But when I crossed the Line and Neutrals I got readings on each of >1999.
I have tested the sockets separately with a Fluke socket tester and it says they're fine. Any ideas? Thanks.
Nick
I have just replaced and tested my own CU.
I did the continuity testing on the 3 ring mains. On each one I crossed over the Line and CPC and got a reading of between 0.2 and 0.3 Ohms. But when I crossed the Line and Neutrals I got readings on each of >1999.
I have tested the sockets separately with a Fluke socket tester and it says they're fine. Any ideas? Thanks.
Nick