- Reaction score
- 12,559
Yes I believe so. Former owner of CGD doing their own thing after selling CGD to Lewden.Is the Fusebox stuff something to do with someone who was high up with Lewden/Control Gear Direct?
Discuss Trade pics for your enjoyment. in the UK Electrical Forum area at ElectriciansForums.net
Yes I believe so. Former owner of CGD doing their own thing after selling CGD to Lewden.Is the Fusebox stuff something to do with someone who was high up with Lewden/Control Gear Direct?
OK then, have a heating DB of mine that's not so neat. Long day, think we finished 9PM by the time that was fitted and tested and all the other stuff we had to do to finish this job. I like these Eaton boards a lot, Much nicer than the Wylex 3PH board I fitted yesterday.Another that’s far too neat
OK then, have a heating DB of mine that's not so neat. Long day, think we finished 9PM by the time that was fitted and tested and all the other stuff we had to do to finish this job. I like these Eaton boards a lot, Much nicer than the Wylex 3PH board I fitted yesterday.
View attachment 52989
It's not that big, fault current of roughly 10kA with the batteries. If I remember tomorrow I'll try and get a picture of the older busbar DC system made up of four 200x15mm copper bars sandwiched together. Unfortunately the old battery system has been removed, they used to use open cell vats around the size of a bath containing the acid and battery plates...Nice! You wouldn't want to short that incoming supply...
when I were an apprentice 20 year ago on the electric board, they wouldn't stock 2mm sleeving, one of the "old boys" would sit and strip 1.5 g/y single to relieve lengths of appropriate sized sleeving as he simply refused to overdress his cpcsAh I should have expected that, the issue was poor stock control, I ran out of 2mm that very morning so had to resort to some 3mm that was in the van. No pleasing some people. ?
Nice first one I have seen that has been numbered, nice jobThis thread is going cold so have another DB.
View attachment 53274
The 3ph one I posted earlier is also numbered, but it's a bit small to see...Nice first one I have seen that has been numbered, nice job
Is it 25mm or 32mm drops into the top?This thread is going cold so have another DB.
View attachment 53274
what make of DB is that? it'd disgustingly tidy.This thread is going cold so have another DB.
View attachment 53274
The top conduits are 32MMIs it 25mm or 32mm drops into the top?
This thread is going cold so have another DB.
View attachment 53274
Eaton again, I'm definitely a fan of the Memshield 3 stuff.what make of DB is that? it'd disgustingly tidy.
I must say the neutral bar is looking a bit untidy, and ignore the cables coming out of the conduit that need combing...the live on circuit 12 is longer than the neutral
The top conduits are 32MM
Reply to Trade pics for your enjoyment. in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.