- Reaction score
- 0
Does anyone know what the voltage across the phases on a single phase to three phase Transwave investor and would it or should it energise a 415 volt AC coil on a DOL starter. Any information would be greatly appreciated
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
- Thread starter Harrywragg49
- Start date
Discuss Transwave investor voltage in the UK Electrical Forum area at ElectriciansForums.net
- Reaction score
- 17,092
Do you mean inverter
Reply to Transwave investor voltage in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
BIG place OK lots of electrical bits.
but one on a 3 phase Radial is tripping its RCCB
so i check the wiring making sure its tight and it has...
Hi All,
Just looking for some advice: I'm in the process of updating an old cable calc spreadsheet that helps to spit out Zs and Voltage Drop...
Anyone come across this before? I was asked to do a Zs on a 3ph surge device; L1 was around 6 ohm, L2 & L3 around 0.11. Wired in singles from a...
Hi all,
I am at odds on whether RCD protection is required on an SWA of 14 metres, clipped direct under flooring direct from CU to an exterior...
Hi, I am looking for a connection diagram or sugestions for a 2.2Kw single phase motor to drive a compressor. The spec plate shows that it can be...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
Dodgy trade pictures for your amusement! - 1 Million Views!Good job someone went to the effort of making the live cable end safe. However it would have...- Latest: freddo
-
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.