Am2 worth appealing

[Tonydnb]

Hi just found out a have failed my am2 on the installation section
Firstly I wondered if I can get any information on how I failed apart from them saying what circuits I failed on ( lighting/ bonding and swa to 16amp socket )

I thought I did all these correctly and can't see what I can fail on on the bonding as mine was all tight double checked all connections.
lighting circuit I used correct breaker, sleaving. All earths terminated, and functionally works- I did feed the light not the switch but can't see why that would be a problem

the socket was also wired all correctly . Phases labeled . Functionally works

any ideas what I could of failed on is it worth appealing for more information or them to re mark it ???

 

[Bobster]

The Am2 requires you to feed from the furthest switch, you've not followed instructions. Unfortunately a fail, I doubt appealing will get you anywhere.

Sorry fella, I think although not 100% certain you can resit individual sections. So you might not have to redo the whole thing.

 

[Tonydnb]

Right okay so I feed the last switch then feed the light from the last switch ??. It's annoying as the examiner said before i started it does not matter how the lighting circuit is wired as long as it works

 

[Bobster]

It will have been stated in the design pack they gave you.

Give the college a ring, although I don't think they will tell you more than just what section you failed.

 

[Tonydnb]

Okay thanks