- Reaction score
- 5,607
I would like to get a better understanding of what the specific IR test results could indicate. I'm talking more about the below 1MΩ area. I'm talking about.. wet plaster, flooding (sitting in water), degraded insulation etc etc, I realise it wouldn't give the answer but it may help in narrowing the fault down.
Has anyone made their own list already and if so it would be great if you could post it up?
I started my list today and it has one entry.. 'both conductors sitting in pool of water' 0.003MΩ!
Just as an after thought I have a result which I realise is deemed as adequate (4.45MΩ), but this was between the earth bar and the neutral bar with ALL conductors removed. Is this out of the ordinary? It was an old rewireable sub main board and wasn't full of dirt inside. They had had a recent flood which had been by the CU but that was 2 weeks before and it was completely dry.
Cheers guys!
Has anyone made their own list already and if so it would be great if you could post it up?
I started my list today and it has one entry.. 'both conductors sitting in pool of water' 0.003MΩ!
Just as an after thought I have a result which I realise is deemed as adequate (4.45MΩ), but this was between the earth bar and the neutral bar with ALL conductors removed. Is this out of the ordinary? It was an old rewireable sub main board and wasn't full of dirt inside. They had had a recent flood which had been by the CU but that was 2 weeks before and it was completely dry.
Cheers guys!