Flat bits, what do you recommend?

[Tes369]

I was doing a premier inn recently all timber framed drilling thousands of holes for the bedrooms. I used flat bits all variets and also CK Auger drill bits they are all good until you hit a nail !!!

What I did use was a 18v Millwaukee Brushless FPD combi 135nm or torque very good piece of kit.

Good price too..

A beast of a drill goes through RSJ's like butter.

# only bad point is the chuck is to smooth to grip after a while I'm considering putting a Makita chuck on mine.

Cheers

 

[willy fixit]

Armeg 16 Piece Twister Drilling Set - For Impact Drivers - https://www.buybrandtools.com/acatalog/armeg-twister-drilling-set-impact-rated-16pc.html?gclid=Cj0KCQiA2NXTBRDoARIsAJRIvLwhrXO7IJUtXqD9lACh_CYQD5vfBqr9YVkbib2WO0vpgbi3v_hVGykaAnBDEALw_wcB

Armeg Nail proof wood beavers are the Bees Knees you get a 20 and 25 with this kit which is expensive but the other bits are brill imho. I've done many jobs with just this kit and an impact driver.
Also I broke the 3mm bit and they sent me a new one and the shank snapped on the 25mm and they sent me a new one - they wouldn't replace the 20mm one that I dropped down a cavity thought. The masonry bits are multi material and go through wood pretty well too.

 

[Wilko]

They look very nice Willy, now I'll have to save up for a set !

 

[Michaelwgroves]

I use these bits only .View attachment 40472

What drill are you using, I got some of these and agree they are awesome, but as my main use is for drilling through joists, my brand new Dewalt 18V Angle drill can only manage 16mm max, the 1.3Ah battery manages 2 holes, my 4Ah does several. But neither battery will drive anything bigger?

 

[willy fixit]

MAKITA DHP481Z 18V BRUSHLESS - it hurts when it kicks back - I have to use the long handle on slow speed cutting 100mm holes in floor boards - also use a Makita angle drill and that works well too. DeWalt should be OK tooI would've thought, although I don't know how the torque compares.

 

[willy fixit]

They look very nice Willy, now I'll have to save up for a set !

I got a good deal at the Exeter ELEX show from Denmans.

 

[buzzlightyear]

What drill are you using, I got some of these and agree they are awesome, but as my main use is for drilling through joists, my brand new Dewalt 18V Angle drill can only manage 16mm max, the 1.3Ah battery manages 2 holes, my 4Ah does several. But neither battery will drive anything bigger?

Makita SDS drill and one of these.

 

[telectrix]

Armeg 16 Piece Twister Drilling Set - For Impact Drivers - https://www.buybrandtools.com/acatalog/armeg-twister-drilling-set-impact-rated-16pc.html?gclid=Cj0KCQiA2NXTBRDoARIsAJRIvLwhrXO7IJUtXqD9lACh_CYQD5vfBqr9YVkbib2WO0vpgbi3v_hVGykaAnBDEALw_wcB

Armeg Nail proof wood beavers are the Bees Knees you get a 20 and 25 with this kit which is expensive but the other bits are brill imho. I've done many jobs with just this kit and an impact driver.
Also I broke the 3mm bit and they sent me a new one and the shank snapped on the 25mm and they sent me a new one - they wouldn't replace the 20mm one that I dropped down a cavity thought. The masonry bits are multi material and go through wood pretty well too.

DROOL.

 

[telectrix]

Makita SDS drill and one of these. View attachment 40604

AND YOU CAN GET A MUCK EATER 18" LONG SDS BETWEEN JOISTS?????

 

[buzzlightyear]

just ordered one for xmas .