Instyle LED Lighting Specialists UK
This official sponsor may provide discounts for members

Discuss Recording SPD install on EIC in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Going to be doing my first SPD board next week, single module SPD and 32 amp MCB before the RCD protected circuits.

Can I ask how and where you are recording these on the EIC?
I would probably record the mcb as a circuit as usual labeled spd but unsure what I need to record about the actual spd module, can I just record the details in the comment box for the circuit?
 
Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members

Strima

-
Arms
Esteemed
You must be logged in to see the message.
 

Risteard

-
Arms
Esteemed
You must be logged in to see the message.
 
  • Thread Starter Thread Starter
  • #9
You must be logged in to see the message.
 
  • Thread Starter Thread Starter
  • #12
You must be logged in to see the message.
 
You must be logged in to see the message.
 

MFS Electrical

-
Mentor
Arms
Esteemed
You must be logged in to see the message.
 

Reply to Recording SPD install on EIC in the Electrical Forum area at ElectriciansForums.net

Instyle LED Lighting Specialists UK
This official sponsor may provide discounts for members
Top Bottom