- Reaction score
- 1
Hi, I have a 12V output from a control box that lights an LED. I want to use that output to switch power to a camera, but don’t want to lose the LED. The LED has a resistor in series.
My first thought was to just put the camera in parallel with the LED, but then thought a relay with the coil in parallel WITH THE LED might be better.
Is this feasible, and if so do I even need the relay? Do I need to do anything else?
Cheers,
Mark
My first thought was to just put the camera in parallel with the LED, but then thought a relay with the coil in parallel WITH THE LED might be better.
Is this feasible, and if so do I even need the relay? Do I need to do anything else?
Cheers,
Mark