Andy up north
DIY
- Reaction score
- 10
Hi
I would greatly appreciate some guidance.
I am replacing a standard ceiling light with an LED one.
To explain.
2 cored wires in to ceiling rose:
earths together.
2 red together and isolated on separate 'clamp', not attached.
2 blacks as the 2 contacts for the hanging light unit.
The wall switch has a single wire in with red, black to the switch contacts.
The LED unit has Live, Neutral and Earth connections.
I assume at the moment that the current light unit is permanently live with the switch completing the circuit.
So now how do I wire up the LED unit to replace it?
Appreciate guidance.
Andy
I would greatly appreciate some guidance.
I am replacing a standard ceiling light with an LED one.
To explain.
2 cored wires in to ceiling rose:
earths together.
2 red together and isolated on separate 'clamp', not attached.
2 blacks as the 2 contacts for the hanging light unit.
The wall switch has a single wire in with red, black to the switch contacts.
The LED unit has Live, Neutral and Earth connections.
I assume at the moment that the current light unit is permanently live with the switch completing the circuit.
So now how do I wire up the LED unit to replace it?
Appreciate guidance.
Andy