- Reaction score
- 1
Discuss Single ph to 3 ph Ramp conversion. in the DIY Electrical Advice area at ElectriciansForums.net
I am concerned, you are asking a basic question about a transformer but you are about to convert from 400v 3ph to 230v single phase using an inverter.
There are many pitfalls waiting for you and my worry is you don’t have a good enough knowledge of the control system.
but to gain knowledge up front , would the transformer be A.C. to DC 24v.
The control circuit will need a 24V supply, this will need to be fed from a permanent supply, not from the output of an inverter.
Your electrical engineer should be able to provide you with a wiring diagram for his proposed control system.
If you want to know any more, post the diagram.
There are many here with experience in the right field to give it a thumbs up or down.
When you say this is a ramp, I presume you mean a car ramp to work under.
Make no mistake, not doing this correctly could lead to serious injury or death.
Reply to Single ph to 3 ph Ramp conversion. in the DIY Electrical Advice area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.