Rockingit

~
Mentor
Arms
Supporter
May 25, 2011
6,161
7,152
10,256,798
Somerset
If you're a qualified, trainee, or retired electrician - Which country is it that your work will be / is / was aimed at?
United Kingdom
What type of forum member are you?
Practising Electrician (Qualified - Domestic or Commercial etc)
Had a chance call-in this afternoon at one of my customers, and while there he asked me if I knew any TV guys. It's not something I do, but asked him what the problem was and he said one of the sets was intermittent in getting signal, but all others in the house were fine. So I had a quick look and saw that there's a twin sat plate, and twin coax plate on the wall, all looking tidy enough (I had no kit with me). But then, he turned the set on to demonstrate the problem, and it worked, without being plugged in to the wall. So, wondering if I might have been some model which had a built-in antenna I took the coax out of the back and the signal went. So, this set was able to receive a good-enough signal for freeview simply down the 3-4m of coax laying on the floor.

Threw me completely, does this happen often??
 
Had a chance call-in this afternoon at one of my customers, and while there he asked me if I knew any TV guys. It's not something I do, but asked him what the problem was and he said one of the sets was intermittent in getting signal, but all others in the house were fine. So I had a quick look and saw that there's a twin sat plate, and twin coax plate on the wall, all looking tidy enough (I had no kit with me). But then, he turned the set on to demonstrate the problem, and it worked, without being plugged in to the wall. So, wondering if I might have been some model which had a built-in antenna I took the coax out of the back and the signal went. So, this set was able to receive a good-enough signal for freeview simply down the 3-4m of coax laying on the floor.

Threw me completely, does this happen often??

This happens in my area with saorview, i can actually see rte mast from my house
 
This happens in my area with saorview, i can actually see rte mast from my house

But the nearest mendips transmitter for this place is miles away and there's hills in between!
 
could be skip. where the signal bounces off the hills and just happens to make landfall behind the tV.
 
Had a chance call-in this afternoon at one of my customers, and while there he asked me if I knew any TV guys. It's not something I do, but asked him what the problem was and he said one of the sets was intermittent in getting signal, but all others in the house were fine. So I had a quick look and saw that there's a twin sat plate, and twin coax plate on the wall, all looking tidy enough (I had no kit with me). But then, he turned the set on to demonstrate the problem, and it worked, without being plugged in to the wall. So, wondering if I might have been some model which had a built-in antenna I took the coax out of the back and the signal went. So, this set was able to receive a good-enough signal for freeview simply down the 3-4m of coax laying on the floor.

Threw me completely, does this happen often??

I use a length of co-ax as an antenna for my laptop USB TV adaptor this does not always receive or tune all the available channels though

But the nearest mendips transmitter for this place is miles away and there's hills in between!

You may find you have a local repeater transmitter as there are quite a few associated with the mendip transmitter
 
Had a chance call-in this afternoon at one of my customers, and while there he asked me if I knew any TV guys. It's not something I do, but asked him what the problem was and he said one of the sets was intermittent in getting signal, but all others in the house were fine. So I had a quick look and saw that there's a twin sat plate, and twin coax plate on the wall, all looking tidy enough (I had no kit with me). But then, he turned the set on to demonstrate the problem, and it worked, without being plugged in to the wall. So, wondering if I might have been some model which had a built-in antenna I took the coax out of the back and the signal went. So, this set was able to receive a good-enough signal for freeview simply down the 3-4m of coax laying on the floor.

Threw me completely, does this happen often??

not when you want it too:6: and in theory the shielding should prevent this
 

Similar threads

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Thread starter

Rockingit

Mentor
Arms
Supporter
~
Joined
Location
Somerset
If you're a qualified, trainee, or retired electrician - Which country is it that your work will be / is / was aimed at?
United Kingdom
What type of forum member are you?
Practising Electrician (Qualified - Domestic or Commercial etc)

Thread Information

Title
TV receiving freeview signal with no aerial attached?
Prefix
N/A
Forum
Freeview and Terrestrial TV Forum
Start date
Last reply date
Replies
5
Unsolved
--

Thread Tags

Advert

Thread statistics

Created
Rockingit,
Last reply from
Barry White,
Replies
5
Views
3,048

Advert