Wagos in trunking

[Josh Kav]

Would it be against regulations to put wagos into some maxi trunking to extend cables for a board change?

 

[telectrix]

No. what's the problem?

 

[Pete999]

Would it be against regulations to put wagos into some maxi trunking to extend cables for a board change?

Needs to be accessible Josh. and if you are stuffing Wagos in trunking it can't be accessible without removing the trunking lid, better to bring it out into a suitable enclosure marked up effectively. All very well knowing there is a joint, but where exactly???? sorry to disappoint others but that's my take, could be searching for hours otherwise, come on guys get real.

 

[Deleted account]

Can’t think of anything wrong with that regs wise.

I think it would be better to take the existing cables into an enclosure (j/b) and connected extensions from there.

 

[Zerax]

What about MF ones ? In the correct box ?

 

[Pete999]

What about MF ones ? In the correct box ?

That is what I was inferring Zerax!!!!!!!!!!

 

[Josh Kav]

Surface mounted cables come from under the stairs about 200mm and stright into the old board so wanted to have it that i could pushed into the void if that makes sense and do the joints in the trunking. Look rough if i just had 8 JBs in a cupboard?

 

[Zerax]

That is what I was inferring Zerax!!!!!!!!!!

Sorry Pete... your post wasn't up when I started typing mine... I'll get me coat..

 

[Pete999]

Sorry Pete... your post wasn't up when I started typing mine... I'll get me coat..

No need Mate
[automerge]1568305333[/automerge]

Can’t think of anything wrong with that regs wise.

I think it would be better to take the existing cables into an enclosure (j/b) and connected extensions from there.

Like I said Pete

 

[ChrisElectrical88]

Why not just a large enough adaptable box with wago din push in things? Trunking either side of it if theres space?