2391-52What exam?
Discuss Eicr codes in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
2391-52What exam?
Sat 2391 some 12 years ago, can't remember that far back2391-52
Do you have your own test equipment?First is practical next Saturday.
Nice, new is it? you can usr that in the practical, advice get plenty of practice, get to know it back to front good luck, you may need it.
Picture??just to hijack the thread, apologies to anyone and everyone, had this today on a EICR.. 3 x 3 phase DBs along with 3 x 3 phase henley blocks mounted on a 4ft. x 4ft. ply board. board rotted away due to a leaking drain (since fixed). getting to the point where the equipment will be held up by the cables. all 3 boards have SWA cables (correctly glanded) along with a load of T/E. can't see any danger so giving it a C3 with the caveat that if it deteriorates any more it would escalate to a C2. your thoughts, gents.
Get the picture Tel, nasty was it?soz pete. no pics. just imagine a sheet of 1/2" ply disintegrating.
If everything mounted was secure then there is no code in my opinion but I would maybe put something in the covering letter to say about the degradation of the wood in which the equipment is mounted to.just to hijack the thread, apologies to anyone and everyone, had this today on a EICR.. 3 x 3 phase DBs along with 3 x 3 phase henley blocks mounted on a 4ft. x 4ft. ply board. board rotted away due to a leaking drain (since fixed). getting to the point where the equipment will be held up by the cables. all 3 boards have SWA cables (correctly glanded) along with a load of T/E. can't see any danger so giving it a C3 with the caveat that if it deteriorates any more it would escalate to a C2. your thoughts, gents.
exactly what i done. even if the board gets worse, the cables will hold the gear up without undue stress. gave it a C3.If everything mounted was secure then there is no code in my opinion but I would maybe put something in the covering letter to say about the degradation of the wood in which the equipment is mounted to.
exactly what i done. even if the board gets worse, the cables will hold the gear up without undue stress. gave it a C3.
I would give a C2 if it was being supported by the cables. If the actual fixings were secure ie the screws or bolts then I wouldn’t codeexactly what i done. even if the board gets worse, the cables will hold the gear up without undue stress. gave it a C3.
Reply to Eicr codes in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.