gas earth bond

[m1ck_b87]

Hi all
Any 1 come across voltage on main bonding conductors before

 

[Deleted member 72666]

What sort of voltage is appearing, what is connected and where are you taking your measurements from?

 

[m1ck_b87]

Edf came out and used a voltage pen on earth connection and said there was voltage, I've come and tested across gas bond and exposed conductive part no voltage

 

[oldtimer]

Have you :-
1. Checked the Ze of the property
2. Checked the continuity of the earth cable from the MET to to earth clamp on the gas pipe.

 

[markythesparky]

Edf came out and used a voltage pen on earth connection and said there was voltage, I've come and tested across gas bond and exposed conductive part no voltage

you might not have an earth at all based on that.

 

[oldtimer]

Edf came out and used a voltage pen on earth connection and said there was voltage, I've come and tested across gas bond and exposed conductive part no voltage

Yea but what pillick in EDF used a voltage pen instead of a earth loop impedance tester and thats why I asked the questions above . I take it you are a electrician ? and if so have you tested the Ze yet

 

[chrish_1977]

A voltage pen, time for me to sell me test kit then I that's all you need. Seriously I have a builder friend who said the same to me, when I actually tested it with me megger, low and behold all ok, were edf touting for work or something, sounds like they have been to the bg school of testing

 

[oldtimer]

Either that or the EDF guy was a saleman who knew nothing about electrics except for the half day monkey see monkey do

 

[MDJ]

Edf came out and used a voltage pen on earth connection and said there was voltage

:38: .

 

[telectrix]

should exchange it for a broad tip felt pen and write "muppet" on his forehead.