hello (opionions on Hager required)

[robgill]

hi there to all...


I have a couple of question for you all...

how do you find HAGER mcb's at the monment we use MERLIN and all though these are very good but are on the pricey side of life and so we are thinking of changing ova but need some feed back before we make the jump

may i just add we use the lower rage of breaker 1, 2, 4, 10 amps for small control swiching etc.

so all your views are welcome need things like faliour rate, build quailty so plaese reply

many thanks Rob..

 

[Spudnik]

Hi Rob and welcome to the forums..

I always use Hager where possible and have never (touch wood) had any problems so far.

 

[Mac]

Hi Rob and welcome to the forum

 

[robgill]

Hi Rob and welcome to the forum

cheers Mac

have you had any probs with Hager etc like i say we need some feed bk cos the saving to us will be quick large as i can use any were from 8 to 15 mcb in one panel....!!!!

 

[Mac]

Hager breakers are great.That's all i've ever used.I think you'll find,that the smallest they make is 6A.
Hager MCB's - Type B & C mcb 3 6 10 16 20 32 40 45 50 amp miniature circuit breaker
I take that back mate.Found the smaller ones on this site.
http://download.hager.com/hagergroup.co.uk/files_download/Hager_Product_Information/2007Catalogue/3ProtectionDevices.pdf

 

[ashrow]

Hager are brill for the 3ph boards but their new single phase boards leave a lot to be desired, they do some good 20a rated din rail timers and all the contactors you need and even din rail mounted emergency light.

I have used them for years (just wish they had not changed the single phase consumer unit !)

Ash

 

[Andy Smith]

Hi Rob we have allot of hagar on site no problems really. welcome along

 

[Darkwood]

Only thing merlin are better for is their internal isolation sliders on their 3ph boards meaning its a lot safer to work in a live board (i know you shouldn't but we all do), hagar have big horrible plastic blanks that slide over the pins

 

[Spudnik]

.....hagar have big horrible plastic blanks that slide over the pins

Better than nowt!

 

[Darkwood]

Better than nowt!

agree think im getting fussy lol