Discuss How much gear is in your van in the Australia area at ElectriciansForums.net

B

bugsy

Decieded no I'll rephrase that lack of work today decieded I would sort the van ,this was the mcb/rcbo box Am I carrying too much crap about
 

Attachments

  • SDC10410.jpg
    147.9 KB · Views: 112
Re: How much crap's in you van

You are so right , I had 2 lengths of barduct rising busbar for 18months decided it would never get used , three weeks later went to look at a job opp bank station UPS rising main - yep Barduct Busbar went to the scrappers and they had stripped it!
 
Re: How much crap's in you van

Tried to clear out my tool bag, four of them, as I am in the habit of chucking off cuts, old fittings etc in there whilst at customers houses. I have a special affinity for the internal screws in jbs, as I lost one once under a floor and didnt have a spare. And for Face plate screws. Attempting to clear the main tool bag was use less, only uption was to upend it on the kitchen table next to the bin. Cant believe I got nearly half a bin liner of "will never be used " out of them. Must immediately transfer cable clips to proper tubs, as the bottom falls out of the cardboard boxes , must of been three hundred in assorted sizes in the bottom of me bag ! yes I did. now all in individual tubs back on the rack in the van !! Also fed up of picking up phillips screwdrivers instead of flat blades, as Wylex were at one time giving a fre set with each board purchased- - Most now in kitchen drawer !!
 

Reply to How much gear is in your van in the Australia area at ElectriciansForums.net

Similar Threads

I recently sold my Renault Trafic as it had done 214,000 miles and I also wanted something more economical. I bought the Citroen Berlingo LWB. A...
Replies
34
Views
2K
Hi I am converting a Sprinter van. I would like to use RCBOs. I want to run 3 seperat Circuits. 1 and 2 for sockets either side of the van and...
Replies
7
Views
2K
Hi all, I'm an fully qualified electrician based in Dundee, Scotland. I have just completed my BS 7671 Amendment 2 course and my 2391-52...
Replies
11
Views
1K
Hello, I have a hypothetical question (I'm an electrical engineer) to better understand RCBOs and how they are used in the USA. Let's say I would...
Replies
9
Views
984
Hi, sorry if this is the wrong place to ask, I am wondering about becoming an electrician of some form or another and thought to come to an...
Replies
15
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock