uHeat Banner - Forum Discount Available
This official sponsor may provide discounts for members

Discuss How to feed garage board in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

First fixed X6 new double sockets in garage the other day (didn’t have sockets to 2nd fix) now it’s TT system, now the board I’m working on is fed from a bigger garage 2.5mm SWA 16A RCBO, the board where I have first fixed the sockets has a Main switch and MCB for lights and sockets,

Would it be best to swap RCBO for MCB to feed the board I’m working on and just RCBO for lights and RCBO for sockets, im sure the Main Switch/RCD for the site is 300mA upfront so all good there.
Thanks
 
Wetroom Store - Network Wetroom Suppliers
This official sponsor may provide discounts for members
  • Thread Starter Thread Starter
  • #3
You must be logged in to see the message.
 

davesparks

-
Mentor
Arms
Esteemed
You must be logged in to see the message.
 

Reply to How to feed garage board in the Electrical Forum area at ElectriciansForums.net

Top Bottom