Discuss Oral Contracts... in the Electricians' Talk area at ElectriciansForums.net

B

bigbaddave

Finished a rewire last week, the quote made for the work was pretty bang on with what was included and what wasnt. It was a "Like for Like rewire"

The only requirements were is had to be 17th Edition rewire.. Anyway when on site after I got the go ahead again before any sockets were fitted i said "Are the sockets to be left where they are.. Yes.. So off I go..

Now then.. I have completed the job issued cert and invoice.. Happy days.. Until the guy rings and says the sockets are too low. They need to be 450mm for 17th edition.. Thats new builds bud not renovation.. we agreed this before any work commenced " Like for Like rewire" yeah but I also said that it needed to be 17th edition and it isnt as the sockets are too low... I've googled it and they need to be higher.. But we agreed they were to be fitted at the same height..

Anyway he says that is doest comply therefore he isnt willing to pay the bill. He has googled it and it doesnt comply...

I said id call him back, at first I was tempted to ask him to complain to my scam but that will take time and I really want it sorted and paid.. Im tempted to just move the sockets and then just get paid..

this will be a lesson though.. Include sockets heights in further quotes..
 
Socket heights aren't 17th edition, that comes under the disability discrimination act, had he also complained that the switch heights are tio high and beed to be lowered too, sounds like you should have got it all in writing to start with before you carried anything out
 
My point exactly but regardless of what the regs are the guy has read on the internet. Lol

I certainly will be including this information in the future, First difficult customer I have had in a while so not to bad to be fair. Just shame its on such a big job.. Want paying.. Ill have a think about waht to do but as it wasnt in writing im tempted just to move them..
 
he's pulling a fast one. the 450mm rule is for new builds, not rewires. ask him to show you the regulation that says they must be that height.. give him 14 days to pay or get thomas higgins on the case.
 

Reply to Oral Contracts... in the Electricians' Talk area at ElectriciansForums.net

Similar Threads

Hi, I recently had an EICR done at my property which unfortunately was unsatisfactory. So the electrican advised a new fuseboard from BG General...
Replies
90
Views
4K
Does a SPD need a dedicated way? I need an extra way in this unit for a 3 phase car charger As you can see its a small unit with no extra...
Replies
36
Views
1K
Rewiring an old farm cottage… every wall brick and previous wiring not done well at all. I can’t locate any of the prescribed zones diagrams on...
Replies
12
Views
2K
Bit of a rant first to explain the situation:- Effing builders again, I knew there was a reason we hardly ever work for them. We've done a few...
Replies
25
Views
1K
Hey all, I'm looking for some advice to help me troubleshoot my strange issue with my consumer unit/fuse board on which my RCD keeps tripping...
Replies
25
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock