Advertisement - Content continues below
Advertisement - Content continues below

Discuss SCHNEIDER RCBO in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Fitted a new Schneider RCBO B20 30mA Single Pole Type A.

Connected function earth and neutral lead, with rcbo turned off, turned slider on, turned rcbo on, tested operation of push button and it went kapot!

Test button now stuck in and will not reset?

Ideas anyone or just a faulty RCBO?

Edit - No outgoing load connected.
 
Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members
Advertisement - Content continues below
B

Bobster

Any outgoing load connected?

If not, most likely a faulty module.
 
I know Square D had an issue with this 10-15 years ago two went bang on me but never heard of it with Schneider. Best bet contact Schneider I am sure they will be interested.
 
Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members
Advertisement - Content continues below

Reply to SCHNEIDER RCBO in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

SuperlecDirect - ElectriciansForums.net Electrical Suppliers
This official sponsor may provide discounts for members
Advertisement - Content continues below
Top Bottom