DB labelling?

[awp_electrical]

Afternoon all,

I have gone to look at installing an extra Socket on a radial circuit in a local cafe and the new DB which was installed by the another Electrician does not have one single label on any of the circuit breakers. The installation only took place in April and I cannot see any details of the installation and the manager also does not have them either.

My question is if I was doing a Domestic installation I am expected to label and supply details of every circuit. Is this not the same practice for a DB in a commercial environment?

It took me half an hour to positively identify the circuit for safe isolation.

Many thanks
Andy

 

[bigbaddave]

Sounds like the 50% of Installs I do.. Pee poor makes jobs that bit harder but hey that's life I'm affraid

 

[Andy78]

See section 514 about labelling to see what should be there, in particular 514.9.1 which includes all the info that should be on the schedule of test results or a db schedule.

 

[awp_electrical]

Sounds like the 50% of Installs I do.. Pee poor makes jobs that bit harder but hey that's life I'm affraid

Bloody crap having to sort out others people mess.

 

[awp_electrical]

Pretty much as I already knew then lol, **** poor practice when being installed. Thank you for confirming thou.
Andy

 

[wozz]

Bloody crap having to sort out others people mess.

Welcome to the trade, surely you have come across this numerous times before!

 

[chrisclose]

We label every circuit as we're running them in so that once in the DB they're labelled to a clear, satisfactory standard. I'd be pretty ****ed to come across this after the way I've been taught to do it, sounds like a bunch of cowboys to me. Maybe it's just me or the way I was taught but I'd never lower myself to this, especially with the DB clear identification is essential to any install I'd ever do.

 

[awp_electrical]

Welcome to the trade, surely you have come across this numerous times before!

Yes but usually it's the odd one but never all of them. I have never seem it domestically but I am still quite new to commercial settings.

 

[awp_electrical]

I have just contacted their manager again and he will now be contacting Head office to call them back and sort it out.

 

[GMES]

Wait till you encounter it in a factory, I get it all the time with being industrial, And there is far more t risk from switching the wrong mcb off compared to domestic. I once had to do an Eicr in a printing firm , there were 2 power boards an 5 x 24 way 3 phase boards with nothing labelled up . Makes my ---'s itch.