Hi all can anyone please help. Daughter has ion16. Alarm. Battery’s wanted changing. Since I have changed them. Keeps going off alarm panel says fault zone 7 have made sure the spring on the tamper is ok still going off any help please guys if the pir is faulty how do I program new pir guys thanks
Discuss I on 16. Pir in the Security Alarms, Door Entry and CCTV (Public) area at ElectriciansForums.net
Share this page
- Reaction score
- 8,949
you might find some useful info in here.
not familiar with that system so i cant give any specific advice.
sorry.
Thank you my friend
Reply to I on 16. Pir in the Security Alarms, Door Entry and CCTV (Public) area at ElectriciansForums.net
Share this page
Similar Threads
Hi, just wondering if anyone could help me. I’ve just installed a texecom Veritas alarm in my garage at home and can’t seem to get rid of the...
Hi
I’ve recently installed a texecom veritus excel alarm system but having an issue with the sounder not going off when triggered by the pir
I’ve...
Morning All
Qualified electrician, usually stay away from alarms but my friends parents have issues.
Texacom Vertas panel, not worked for over 3...
Hi,
My alarm system is a Texecom control unit (Premier 64-w) + Keypad + Sounder, and is using the wired zones 1-4 only, with no additional...
My Veritas R8 Excel panel recently developed a power fault and I have replaced the entire unit and reprogrammed it. I can part set the alarm when...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.