Aico 3000 Range
This official sponsor may provide discounts for members
Advertisement - Content continues below
Advertisement - Content continues below

Discuss Making Good Tips! in the Industrial Electrician Talk area at ElectriciansForums.net

W

WarrenG

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Though I would start a thread for some making good tips.

I usually get some one in to make good for me (which of course costs) but if there were any good quick tips out there, it could save a small furtune and I would consider doing some myself. :)

Well smaller bits anyway. I wouldn't want to attempted plastering a whole wall! :(

I have seen stuff like ready made plaster ect.......
 
Advertisement - Content continues below
E

ezzzekiel

  • Thread Starter Thread Starter
  • #2
waste of time mate (im lucky i guess served time as plasterer before i retrained as spark- best of both worlds)

nothing matches a proper skim :)
 
W

WarrenG

  • Thread Starter Thread Starter
  • #3
Agree........timing can be a problem when you get someone else in on a job and I hate having to leave jobs uncomplete.

Obviously the bigger make good jobs would have to be arranged anyway but for a small channel for an additional socket I would rather get it finnished and done. And get paid! :)
 
Last edited by a moderator:
A

adamh

  • Thread Starter Thread Starter
  • #4
what size cable did you put in to need the whole wall plastering?
 
Test Meter - Forum Sponsors since 2007!
This official sponsor may provide discounts for members
Advertisement - Content continues below

Reply to Making Good Tips! in the Industrial Electrician Talk area at ElectriciansForums.net

CK Tools :) The professionals choice when it comes to Electrical Tools
This official sponsor may provide discounts for members
Advertisement - Content continues below
Top Bottom