Discuss Pancake , fancake , duplex , nail on , rough in in the UK Electrical Forum area at ElectriciansForums.net

Well there's 17 mins of my life I'm not going to be getting back.
 
Interesting to see Arc Fault Breakers appear more common over there, and a quick search suggests not so pricey. I've yet to actually see an AFDD here.
 
Interesting to see Arc Fault Breakers appear more common over there, and a quick search suggests not so pricey. I've yet to actually see an AFDD here.
They basically came about in the U.S. as their installation and testing regimes are so poor that they're needed. Do a search on here from a few years back and you'll find the old guard of Tony and Eng slagging them off relentlessly.
 
I believe they used to suffer a lot with arcing faults because the plug tops they use and extension cords are extremely flimsy and prone to fraying and snapping
 
Also poorly connected Wire nuts also contributed to a lot of badly burned out cables joints and fires in back boxes
 
With apologies to the U.S. members on here.... in my experience of working in the States their standards leave a lot to be desired.
 
With apologies to the U.S. members on here.... in my experience of working in the States their standards leave a lot to be desired.

ultimately it will be exactly the same here or anywhere , you will have good installation electricians & rubbish electricians with shonky standarea.
if the code in the U.S is followed to the letter their istallions will be perfectly adequate.
they have some interesting codes of practice , like how many cables you can put in a box to how many clips you have to use etc
 

Reply to Pancake , fancake , duplex , nail on , rough in in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

I had a job recently where myself and an apprentice had to gland and terminate a 50mm SWA cable in a panel. I put the locknut in a vice and filed...
Replies
83
Views
7K
Thought it'd be interesting to see for those who are self employed. Work for themselves. As I'm doing level 2 . Nice to see how others already in...
Replies
1
Views
290
Evening everyone . Currently looking at pricing a job up . It’s a hot tub supply . Outside socket with a few spare ways in an outdoor cu . 10mm...
Replies
7
Views
668
I am looking at installation of an architectural dimmer, that is will supply 6 channels, with 20A circuits each (2400W ea). Our hall has can light...
Replies
2
Views
709
I recently purchased a rural property in Arizona. The property receives power from APS, the local electric utility. Power arrives from the...
Replies
3
Views
914

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock