Switch fuse - metal clad recommendations

[Octopus]

Need to do a switch fuse install and I was wondering which products people prefer ........

Needs to be metal as the sub main is going to be SWA

Thanks

 

[Rpa07]

Wylex available 100, 80 and 60. Very nice looking unit. Haven’t had the pleasure to use one yet but. . .
Little extra expense but a one off.

 

[Octopus]

Wylex available 100, 80 and 60. Very nice looking unit. Haven’t had the pleasure to use one yet but. . .
Little extra expense but a one off.

Do you mean this one?

100 Amp SP & N Switchfuse - Metal - 100A Fuse Fitted - https://www.tlc-direct.co.uk/Products/WYDSF100M.html

Its quite big and I need to fit it into the meter cupboard!

 

[Rpa07]

Well you didn’t say you had restrictions! It’s not that small but is after all a switch and a fuse holder. I’ll keep looking - what dimensions do you have?

Its quite big and I need to fit it into the meter cupboard!

 

[Rpa07]

DP Switched

• 100A Fused Switch (2pole)
• 2 pole fused switch ideal for the protection and isolation of incoming supplies up to 100A.
• Supplied complete with 63A, 80A & 100A fuses.
• Knockouts 25mm /32mm top and bottom
• Maximum cable capacity: 35mm
• BS EN 60947-3

• Dimensions (mm):
  250H x 135W x 87D (inc lid)

Lewden smaller in all dimensions and cheaper. From TLC. Have you checked what our sponsor carries?

 

[Andy78]

Lewden are slightly smaller.....

100A SP&N Fused Switch c/w 63A 80A & 100A fuses - https://www.tlc-direct.co.uk/Products/CGFS100.html?source=adwords&ad_position=1o1&ad_id=45425533757&placement=&kw=&network=g&matchtype=&ad_type=pla&product_id=CGFS100&product_partition_id=174053525107&test=finalurl_v2&gclid=CjwKCAjwiPbWBRBtEiwAJakcpBEgCLBHqS7bcI2fSSn43n4gRhvSc84CFSwxS4_zZds_VA4UVfG8TRoCcEAQAvD_BwE

Other than that, a metal enclosure butted up to a KMF switchfuse might be smaller still

 

[telectrix]

you could use this:
Lewden 80 AMP FUSED SWITCH 2P - https://www.superlecdirect.com/p-msf100-lewden-80-amp-fused-switch-2p?gclid=CjwKCAjwiPbWBRBtEiwAJakcpIpyJj1xyKXl-CWkG9edfk8zlLyC9k6313-2JzJZXi6ClvcuxwPu2BoCkloQAvD_BwE

+ ad. box to gland SWA into.

 

[Octopus]

Well you didn’t say you had restrictions! It’s not that small but is after all a switch and a fuse holder. I’ll keep looking - what dimensions do you have?

Apologies - more haste, less speed.

The Lewdens one looks OK and I didn't know TLC sold them .......... last time round I used a Proteus unit - which didn't impress me much!

 

[Octopus]

Have you checked what our sponsor carries?

No, and FYI I buy as much as I can locally - its worth it to keep the wholesalers onside..

 

[Leesparkykent]

Twitter - https://mobile.twitter.com/CPFuseBox/status/976785731485143040/video/1

Same as lewden but has tail clamp.