Alternative bonding clamp.

[white armour]

Have to bond to incoming water pipe with restricted access, was wondering what people use as an alternative to the common or garden variety.

Have looked at ezybond & tenby rapid clamp, but wondered if anyone had found anything better out there.

Regards wa

 

[cagedanimal2010]

evening WA, what do you mean in regards to restricted access, never to be seen again?

Danny

 

[white armour]

Hi, restricted access = can only get one arm behind unit once washing machine has been removed. Can see incoming pipe and stop tap through access hole in back panel which is not big enough to allow my hand through and which cannot be removed, customer does not want any damage to inside of cupboard.

Regards wa

 

[malcolmsanford]

Can you not get access to the main incomer somewhere else, the 600mm is just preferable, and as long as you do it before a branch.

 

[white armour]

Thanks for the supply malcolm, unfortunately the main incomer was moved from it's original position a number of years ago to where it is now; single story extension with no access from below or above or sideways etc.

Customer does drives/paving etc and said that he will lift his paving slabs so I can go out through garage in conduit and under his slabs in ducting (he will do lifting & provide ducting) and then into the kitchen through the wall adjacent to stop tap. Just a question of me getting behind unit to connect.

Regards wa

 

[Ponty Massive]

These are great for tight spots. Just put against the pipe and twist.

 

[white armour]

Thanks Ponty, think I will give them a go, take it that is the tenby rapid clamp?

Regards wa

 

[Ponty Massive]

WA, they are made by Legrand http://www.legrand.co.uk/en/en/liblocal/pdf/Tenby%20Rapid%20Clamp%20Ultra%20DL.pdf

Hope this helps.